FOCUS AUDIO FR6 (REFERENCE SERIES)
SPECIFICATIONS
Frequency Response: 48Hz-22kHz
+/- 3dB
Sensitivity: 85dB/1
Watt/1 metre
Impedance: Nominal
8 Ohms
Recommended Power 20-100 Watts per channel
Crossover Frequency: 3 kHz
Crossover Design: Proprietary design
using high purity
Copper
coils and selected capacitors
Drivers: One-
1” ferrofluid soft dome tweeter with
double
chamber damping
One- 5”
polypropylene cone driver
Termination: Bi-wire
gold plated binding posts
Size: 13”
x 7” x 8” (HxWxD)
Net Weight: 15 lbs
each
It was difficult for me
to find any literature on the FR6. My guess is it was probably one of Focus
Audio’s first generation bookshelf speakers which have long been discontinued.
However, I did find information on the FR6 MkII. All the specifications are
identical right up to its dimensions. The only difference I could find was the
power rating for the MkII is rated at 20-150 Watts per channel.
The pair I own was
purchased circa 2000. It was highly recommended by the dealer to match the amp.
When I first listened to the FR6 I found it to be more detailed compared with
the Acoustic Energy speakers I had at that time. The FR6 is a bass reflex
speaker(ported enclosure) which is essential in improving efficiency at low
frequencies. The port is located at the rear, so it is important to have proper
placement.
There is a sense of
presence and transparency, especially for jazz and slow rock. The FR6 has
excellent soundstage. Bass is tight, but lacks punch. An increase in volume
(quite high) would result in muddy bass and severe distortion. This, I presume
is that the manufacturers never intended it to be a rocker or for Home Theatre.
No comments:
Post a Comment